Front Disc Kit for 356A 1956-59 models. (retaining original rear drums). 5×205 stud pattern.Please note the discs are solid .
*Special order item, approx 5-7 days*
Every kit is complete with CNC machined cast alloy hubs with rotors and wheel bearings installed, CNC machined caliper brackets, new calipers with pads, stainless steel grease caps, stainless steel dust covers (if applicable), brake hoses and fitting instructions.
Further to the parts listed above our kit contains the following items-
19.05mm dual circuit master cylinder, steel braided front hoses, ATE 2 pin brake light switch & boot, brake fluid reservoir & stainless steel bracket for mounting neatly in the front compartment and a length of blue brake fluid hose!
The CSP disc brake is basically a hub/disc combination. The CNC machined cast alloy hubs accept discs made in Germany with a diameter of 282×9 mm through high-strength connecting elements. The modified calipers are also from a German mass production manufacturer.
Based on the unmodified axle components of the respective cars the CSP disc brakes are mounted to the original spindles by CNC machined adapters. There is no need to modify or alter the spindles, which makes it easy to swap back to the original drum brakes if needed.
Not for use with 14″ wheels or smaller diameter